This seller is currently away until 27th January, 2020
Orders can still be placed and will be dispatched from 27th January onward...
No products
NMEA Smart Transducers
- AIS Systems
- Autopilots
- Charts
- Communications
- Echo Sounders
- Electrical
- navigation
- Entertainment
- GPS Chart Plotters
- Installation
- Instruments
- Radar
- Safety
New products
-
AIRMAR 44-072-2-41 DST800 P17 THRU-HULL TRI-DUCER 235KHZ NMEA 0183
NMEA 0183 Version - No Connector VIEW DST800 Bottom Coverage
£ 274.17 -
AIRMAR 44-196-2-01 DST800 P617V THRU-HULL TRI-DUCER 235KHZ NMEA 2000
NMEA 2000 Version View DST800 Bottom Coverage
£ 237.50 -
Airmar B117 Furuno 10 pin 50/200kHz 600 Watt Transducer
Airmar TRANSDUCER Coverage Calculator
£ 157.50 -
Airmar B117 Standard Horizon / SEIWA 8 pin 50/200kHz 600 Watt Transducer
Airmar Transducer Coverage Calculator
£ 199.17 -
Airmar B117 Generic Mix & Match 5 Pin 50/200kHz 600 Watt Transducer
See Accessories below for appropriate Mix and Match Adapter Cable to...
£ 132.50 -
Cobra CM-110-034 Battery Pack for HH600
COBRA MR HH600 VHF replacement 2000 mAh Li-Ion Battery Pack (Black)
£ 32.50 -
NASA Marine V2 Wind Mast Head Unit replacement 20 meter cable
Replacment 20 metre mast cable for NASA Marine Version 2, three wire...
£ 27.08 -
ICOM IC-M37E Buoyant VHF Marine Transceiver
The IC-M37E is Icom's latest buoyant marine VHF handheld and comes with...
£ 182.50
Airmar 'Smart' transducers contain active circuitry that converts the sensor data into a standard NMEA format.
NMEA 0183 versions output standard NMEA 0183 sentences for connection to a display or multiplexer. These transducers must be connected to a 12v power supply.
NMEA 2000 versions output standard NMEA 2000 data formats and have an NMEA 200...
Airmar 'Smart' transducers contain active circuitry that converts the sensor data into a standard NMEA format.
NMEA 0183 versions output standard NMEA 0183 sentences for connection to a display or multiplexer. These transducers must be connected to a 12v power supply.
NMEA 2000 versions output standard NMEA 2000 data formats and have an NMEA 2000 drop cable attached, ready to plug into a T-connector on a network backbone. These transducers are powered by the network.
Smart depth transducers use the 235kHz frequency so as not to interfere with fishfinder transducers.
Note that there are no NMEA fishfinder transducers. Fishfinder transducers produce a large volume of analog data that cannot be converted to NMEA format.
NMEA Smart Transducers There are 3 products.
-
Airmar B122 Bronze Thru Hull Smart Transducer
Frequency: 235 kHzFunction: Depth,TemperatureHousing Material: BronzeMounting Style: Thru-Hull
£ 540.83Out of stock -
Airmar P79S Smart Transducer
Installation: In-Hull Power: 60 Watt Frequency: 235kHz Function: Depth only Cable length: 6 meter Connector: Lowrance/ Simrad X-Sonic 9 pinAirmar Part Number: 31-494-3-02Lowrance / Simrad Part Number: 000-13942-001 View P79S Bottom Coverage
£ 307.50In Stock -
Airmar P39 NMEA2000 Transom mount Triducer
Airmar P39 NMEA2000 with 6m cable and transom mount triducer , Depth , Speed and Temperature
£ 282.50Out of stock
