The QK-A016 is a high precision battery monitor and can be used for...
The new A026+ is an incredibly versatile device with outstanding build...
The QK-A015-TX Active AIS-VHF Antenna Splitter allows one VHF antenna to...
Brackets and other accessories
NF80 Non Follow Up remote unit with display, 6m factory mounted drop cable, T-connector, front bezel, installation and user manual, gasket for panel mounting, mounting screws. Take command and Mode buttons. Provides course change in Auto mode. Optional bulkhead mounting box shown in image not included, see accessories below.
The Simrad R3000X Remote Control is a small handheld remote control with two push buttons for power steering
The RF300 rudder feedback unit contributes towards smooth and accurate auto-steering by determining rudder angle. It is to be used as part of an autopilot system on boats with inboard engines. Key Features: Variable frequency output for direct connection to autopilot computers 10 m Cable
Rudder Angle Adapter YDRA-01 allows you to connect an existing resistive type rudder angle sensor installed on a rudder and supply NMEA 2000 autopilots, chart plotters and other devices with the rudder angle. Available if NMEA2000 or SeaTalk ng versions
Pair of Motor Replacement Brushes for Simrad RPU300 Reversing Motor Autopilot PumpNew Brush dimensions: Length 19.5 mm x Width 12.5 mm x Depth 8 mmSIMRAD Part Number 21118682
Pair of PAVALUX Motor Replacement Brushes for Simrad RPU80 / RPU160 Reversing Motor Autopilot PumpBrush dimensions: Length 18 mm x Width 10 mm x Depth 6 mmSIMRAD Part Number 000-13960-001
Optional mounting bracket for AP24 / AP28 / AP60 and IS20 display units Allows the standard console mounted display to be desktop mounted
Pair of LEMAC Motor Replacement Brushes for Simrad RPU80 / RPU160 Reversing Motor Autopilot PumpBrush dimensions: Length 18.2 mm x Width 9 mm x Depth 6 mmSIMRAD Part Number 21118666
SIMRAD RF300 Transmission Link Assy
AP22 and AP26 Optional display mounting bracket
Pair of Replacement Motor Brushes for RPU80 / RPU160 Brush dimensions: Length 10 mm x Width 7 mm x Depth 5.5 mm
Replacement Clutch Kit for ST4000 mk2 Autopilot