Airmar P79 Transducer Installation Kit
GX1400E VHF DSC Marine Radio with power lead, mic and mounting bracket.
The QK-A015-RX Active AIS-VHF Antenna Splitter allows one VHF antenna to...
raymarine SeaTalk and SeaTalk NG accessories
The Router is a smart NMEA 0183 and SeaTalk multiplexer which also allows you to see data from marine devices on a PC or smartphone.
The New Version of the Voyage Recorder that now has Audio also Available in NMEA2000 or SeaTalk ng connections
A gateway for engines with a J1708 serial interface to a NMEA 2000 marine digital network. With it, you can see engine revolutions, temperature, working hours, fuel rate and other information on the screen of a chart plotter and other display devices on an NMEA 2000 network.
SEATALKng Backbone Kit. This is a larger backbone kit which contains: Two Terminators, Power Cable, 4 x T-Piece Connectors, 20m Backbone Cable, 2 x 5m Backbone Cable.
The NMEA 2000 Wi-Fi Gateway allows you to see data from a NMEA 2000 marine digital network on a PC or smartphone. With it, you get marine network data including vessel course, speed, position, wind speed and direction, water depth, AIS messages from vessels and aircrafts and other navigation data in popular software applications.
Gateway for Volvo Penta and J1939 engines to NMEA 2000 marine electronics network. It will provide you with engine revolutions, motor hours, coolant temperature, battery voltage, warning and alarms, fuel rate and other data on the screen of your chart plotter.
Bi-directional gateway allows you to see data from a NMEA 2000 marine digital network on a PC, laptop or tablet PC with Microsoft Windows, Mac OS or Linux. Available with NMEA2000 or SeaTalk NG connectors
Combines up to 3 NMEA inputs with a SeaTalk bus…Advanced filtering and routing functions for input NMEA sentencesBi-directional USB/WiFi enables connection between navigation devices and Autopilot
Yacht Devices NMEA Bridge unifies two physical NMEA 2000 networks into a single logical network, smoothly exchanging messages between them. The Device also supports filtering and processing of transmitted messages. Available with NMEA2000 or SeaTalk NG connectors
Connects NMEA 0183 and Raymarine SeaTalk1 sensors and/or equipment to a NMEA 2000 chart plotter. Combines up to 3 NMEA inputs with a SeaTalk1 data input Converts the combined data to NMEA 2000 for your chart plotter. (1-way conversion) WiFi, USB and NMEA 2000 output Filtering un-necessary NMEA 0183 sentences
ST-NMEA (ISO) Converter The ideal data converter for any legacy Autohelm or Raymarine system
NGW-1 is an NMEA 0183 - NMEA2000 GATEWAY to Raymarine STNG